Safety Instructions For Planers - Parkside PHA 12 B2 Originalbetriebsanleitung

GB
fied. Damaged or modified batteries
may exhibit unpredictable behaviour
resulting in fire, explosion or risk of in-
jury.
f) Do not expose a battery pack
or tool to fire or excessive tem-
perature. Exposure to fire or temper-
ature above 130 °C may cause explo-
sion.
g) Follow all charging instructions
and do not charge the battery
pack or tool outside the tem-
perature range specified in the
instructions. Charging improperly
or at temperatures outside the spe-
cified range may damage the battery
and increase the risk of fire.
6. SERVICE
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
b) Never service damaged bat-
tery packs. Service of battery packs
should only be performed by the man-
ufacturer or authorized service pro-
viders.
Safety instructions for
planers
• Wait for the cutter to stop be-
fore setting the tool down. An
exposed rotating cutter may engage
the surface leading to possible loss of
control and serious injury.
• Use clamps or another practical
way to secure and support the
workpiece to a stable platform.
Holding the workpiece by your hand or
against the body leaves it unstable and
may lead to loss of control.
• While working, always hold
the planer in such a way that
26
the planer base plate lies flat
against the workpiece. Otherwise
the planer could slip and cause injury.
• Only bring the power tool in-
to contact with the workpiece
when switched on. Otherwise
there is danger of kickback if the cut-
ting tool jams in the workpiece.
• Do not allow the chip ejector
to come into contact with your
hands. You may be injured by rotat-
ing parts.
• Never plane over metal ob-
jects, nails or screws. Cutters and
cutter shafts could become damaged
and cause increased vibration.
• Hazardous dust may occur dur-
ing work. Wear a dust mask and use
external dust extraction.
• Check the blade regularly for
damage. Only use sharp, undam-
aged blades.
• Keep the ventilation openings clean.
• Switch off the device and remove the
rechargeable battery. Make sure that
all moving parts have come to a com-
plete stop
• when leaving the device,,
• before removing obstructions or
loosening blockages,,
• before checking the device, clean-
ing it or performing maintenance
work on it,
• to check the device for damage
after contact with a foreign object,
• to check the device immediately if it
starts to vibrate excessively.
• For safety reasons, replace
worn or damaged parts. Only
use original spare parts and accessor-
ies.
• Only use accessories recom-
mended by PARKSIDE. Unsuitable