General Safety Instructions; General Safety Instructions For Power Tools - Parkside PADM 1250 A1 Originalbetriebsanleitung

GB IE
Setting the planing table
0
Chip removal, surface planer
1
2
Working direction
Working direction
Planing width, max. 204 mm
max
204 mm
Scale, thicknesser
Symbols used in the instruction
manual:
Hazard symbol with infor-
mation on the prevention of
personal injury or property
damage
Hazard symbol with information on
damage prevention
Pull out the mains plug.
Advisory symbol with information on
how to best use the device

General safety instructions

Attention! The following basic
safety precautions must be ob-
served while using power tools to
protect against electric shock, injury
and risk of fi re:
There is a risk of injuries.
24
General Safety Instructions
for Power Tools
WARNING! Read all safety
instructions and guidelines
carefully.Failure to follow the
safety instructions and guidelines
may result in electric shock, fi re
and/or serious injuries.
Save all safety instructions and
guidelines for the future.
The term "power tool" used in the safety
instructions refers to mains-operated electric
tools (with a mains cable) and to battery-op-
erated electric tools (without a mains cable).
Safe working
• Keep your work area tidy
– An untidy workplace can lead to
accidents.
• Consider environment
infl uences
– Do not expose power tools to rain.
– Do not use power tools in damp or
wet surroundings.
– Ensure the work area is adequately lit.
– Do not use power tools where there is
a fi re or explosion hazard.
• Protect yourself against electric
shock
– Avoid body contact with earthed
parts (e.g. pipes, radiators, electric
cookers, refrigerators).
• Keep other people away!
- Do not allow other people, especially
children, to touch the power tool or
cable, and keep them away from
your work area.
• Store unused power tools safely
– Unused power tools should be stored
in a dry, high or locked place, out of
the reach of children.