Auto-Negotiate - Hirschmann HiOS-2S RSPL Referenzhandbuch

Interface

26.2 auto-negotiate

26.2.1 auto-negotiate

Enable or disable automatic negotiation on the interface. The cable crossing
settings have no effect if auto-negotiation is enabled. In this case cable cros-
sing is always set to auto. Cable crossing is set to the value chosen by the
user if auto-negotiation is disabled.

Mode: Interface Range Mode

Privilege Level: Operator

Format: auto-negotiate
no auto-negotiate

Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no auto-negotiate
RM CLI HiOS-2S RSPL
Release 5.0 05/2015
343