Configuration
9.2.7
config envm config-save
Allow the configuration to be saved to this memory device.
Mode: Global Config Mode
Privilege Level: Operator
Format: config envm config-save <P-1>
Parameter Value
sd
P-1
no config envm config-save
Disable the option
Mode: Global Config Mode
Privilege Level: Operator
Format: no config envm config-save <P-1>
9.2.8
config envm load-priority
Configure the order of configuration load attempts from memory devices at
boot time. If one load is successful, then the device discards further attempts.
Mode: Global Config Mode
Privilege Level: Operator
Format: config envm load-priority <P-1> <P-2>
Parameter Value
sd
P-1
disable
P-2
first
146
Meaning
SD-Card
Meaning
SD-Card
Config will not be loaded at all
Config will be loaded first. If successful,
no other config will be tried.
9.2 config
RM CLI HiOS-2S RSPL
Release 5.0 05/2015