Cleaning And Maintenance - Inventum SKV4178B Benutzerhandbuch

9 Wine
Note: please store different foods according to the compartments or target storage temperature of your purchased
products.
- If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to
prevent mould developing within the appliance.
Water dispenser cleaning (special for water dispenser products):
- Clean water tanks if they have not been used for 48 h; flush the water system connected to a water supply if water has
not been drawn for 5 days.
WARNING -Food needs to be packed in bags before putting into the refrigerator, and liquids need to be packed in bottles or
capped containers to avoid the problem that the product design structure is not easy to clean.
6

cleaning and maintenance

Before cleaning the appliance always unplug the appliance.
Clean the interior of the appliance. Use warm soapy water with, for instance, washing-up liquid, all-purpose cleaner or
soda in order to prevent nasty smells. Wipe the inside of the appliance after cleaning with clean water and properly wipe
everything dry. Leave the appliance to dry for 1 to 2 hours.
The shelves, drawers and door compartments can be removed from the appliance easily and washed by hand. These
components may never be cleaned in the dishwasher.
For areas that are difficult to clean in the refrigerator, such as narrow gaps or corners, it is recommended to wipe them
regularly with a soft rag, soft brush, etc. When necessary use some auxiliary tools, such as thin sticks (tooth picks), to ensure
no contamination can accumulate in these areas.
Clean the outside of the refrigerator and the door gasket with mild soap and water. Use a soft moist cloth.
We recommend that you dust the back of the appliance and on the floor with a cloth or vacuum cleaner once a year in order
to maintain a good output and low energy consumption.
Do not use hard brushes, cleaning steel wire balls, wire brushes, abrasives, such as toothpastes, organic solvents (such as
alcohol, acetone, oils, etc.), boiling water, acid or alkaline items to clean the refrigerator considering that this may damage
the fridge surface and interior. Boiling water and benzene may deform or damage plastic parts..
Defrosting
The freezer compartment of the appliance is frost-free - no-frost. With proper use, there should not be any frost
accumulated.
However, in case of improper use of the freezer compartment, frost might build up in the freezer compartment after the
appliance has been used for a period of time. Defrost the freezer compartment when the layer of ice reaches a thickness of
3 mm. Keep the contents of the freezer in a cool place and wrapped in blankets or newspapers. Switch the thermostat off.
Defrost the freezer compartment. You can speed up the defrosting process by placing a bowl of hot water in the freezer. Do
not use sharp metal objects for this operation. They could puncture the refrigerator circuit and cause irreparable damage to
the unit. Use a plastic scraper.
Clean and dry the freezer. Plug the appliance in and set the thermostat to the desired temperature setting. When the freezer
compartment reaches its correct temperature, replace the food items.
Warning: Never remove the ice with the aid of sharp objects, defrost sprays, a hair-drier, a heater, or similar items. This may
lead to
unsafe situations and may cause irreparable damage to the appliance
Replacing the LED lighting
This appliance is equipped with a LED light bulb. It can be used for a long time. In case, the LED bulb is blown, it must be
replaced by a qualified person to avoid any hazard. Contact the Inventum service department.
24 24
• • English English
+5 ≤+20 Red wine, white wine, sparkling wine, etc.