Charging - Bluetti AC180 Benutzerhandbuch

4.3 Charging

AC180 supports four charging methods: AC, solar, car(cigarette lighter) and generator.
4.3.1. AC Charging (Wall Outlet)
Simply plug the AC180 into the standard wall outlet and start charging.
AC180 supports Turbo/Standard/Silent charging modes. It's set to standard charging by
default, while the Turbo and silent modes can be enabled in BLUETTI app. BLUETTI's AC
charging mode guide is as follows:
1) Turbo charging comes in handy when you need AC180 to be replenished in short time.
2) Standard charging is more friendly to AC180's battery.
3) Silent charging gives you quiet, low-power operation for long battery life.
4.3.2.Solar Charging
Connect the solar panels (in series or parallel) to AC180 via the solar charging cable.
Note: Please make sure your solar panels comply with:
Voc: 12V-60V
Warning: The open circuit voltage of solar panels cannot exceed 60V, otherwise it will
damage the device(Note:It's not covered in the warranty)
Input Current: 10A Max. Input Power: 500W Max.
15
JUST POWER ON