Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Clear
Mute
Reset
N.o.m.
8. Parameter
Input level
More
Reset
N.o.m.
Mic line
1
More
Reset
N.o.m.
On
Off
Level
Reset
N.o.m.
-6 dB
-
+
Reset
N.o.m.
Mic line
2
More
Reset
N.o.m.
Off
On
Reset
N.o.m.
This menu is for changing the input levels of all possible signal inputs.
Example of a ratio to achieve the same volume (input level):
Microphone line 1:
32 microphone units
Microphone line 2:
5 microphone units
To avoid an overload in the second line we recommend to connect 5 microphone units in microphone line 2.
The input levels for auxiliary and telephone have to be changed as well.
46
Clear:
The chairman can switch off all activated delegate microphone units with the
priority button.
In this menu the parameters of input levels can be adjusted. Press the left button (4) to enter the
sub-menu.
Press the right button (5) to choose between:
- Microphone Line 1
- Microphone Line 2
- Auxiliary
- Telephone
Pressing the left button (4) you will access the chosen menu item.
The present adjustment is shown in the top line. In this example the microphone line 1 is switched
on.
Press the right button (5) to adjust the level.
Use the left (4) or right button (5) to adjust the level.
Important:
If not more than 32 microphone units have been connected to the MCS 100 discussion control unit,
i.e. there are no microphone units connected to the microphone line 2 (10), so this microphone line
has to be switched off via the menu. This refers also to the Auxiliary-Input AUX (13) and telephone
input AF (12).
^
=
-7 dB
^
=
-12 dB
Werbung
Inhaltsverzeichnis
