Zodiac Z350iQ Montage- Und Gebrauchsanleitung Seite 9

To rotate the user interface :
Unscrew the 4 screws on the top cover.
CAUTION : The display board (under the display screen) is connected by a cable to the control board inside the unit.
Handle the top cover carefully to do not damage this cable.
User
interface
Pass the cable connecting the display board
to the control board through the cable guides,
depending on the desired position (see below).
Wire path when rotating the user
interface to the left
Screw back the 4 screws on the top cover.
Hydraulic
connections
Wire path in neutral position
Lift the top cover and rotate it in the chosen position.
User
interface
Wire path when rotating the user
interface to the right
Top
EN
cover
7