Declarations Of Conformity; General Power Tool Safety Warnings - Makita DUX60 Betriebsanleitung

KR400MP
KR401MP
EE400MP
EJ400MP
EJ400MP + LE400MP
BR400MP
SW400MP
UB400MP
UB401MP
UB402MP
PF400MP
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).

Declarations of Conformity

For European countries only
The Declarations of conformity are included in Annex A
to this instruction manual.
SAFETY WARNINGS

General power tool safety warnings

WARNING
Read all safety warnings, instruc-
tions, illustrations and specifications provided with
this power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Attachment Left handle (Front grip) Right handle (Rear grip)
2
ah (m/s ) Uncertainty
2
K (m/s )
1.5
2.5
1.5
2.5
1.5
2.5
4.0 1.5
4.5 1.5
1.5
2.5
2.6 1.5
4.5 2.0
3.6 1.7
1.5
2.5
1.5
2.5
Important safety instructions for
battery cartridge
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using
battery.
2. Do not disassemble or tamper with the battery
cartridge. It may result in a fire, excessive heat,
or explosion.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
If electrolyte gets into your eyes, rinse them
4.
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
Do not short the battery cartridge:
5.
(1) Do not touch the terminals with any con-
ductive material.
(2) Avoid storing battery cartridge in a con-
tainer with other metal objects such as
nails, coins, etc.
(3) Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
flow, overheating, possible burns and even a
breakdown.
9 ENGLISH
Applicable
standard
2
ah (m/s ) Uncertainty
2
K (m/s )
1.5
2.5
1.5
2.5
1.5 ISO11789
2.5
3.0 1.5 ISO10517
3.0 1.5 ISO10517
1.5 EN60335-2-72
2.5
2.6 1.5 EN60335-2-72
1.5 EN50636-2-100
2.5
1.5 EN50636-2-100
2.5
1.5 EN50636-2-100
2.5
1.5 ISO22867
2.5
EN709
EN709