ratiotec RS 1000 Bedienungsanleitung Seite 17

Reference weighing
This function allows you to use the scale for other items than just exclusively for coins and banknotes only, such
as prescriptions, screws, etc. In the SETUP menu you can select the Reference function and confirm the setting
by pressing the OK button. Reference function flashes continuously until the objects are placed on it. As soon as
you have placed 20 objects on the weighing support, you will hear a signal. Then press the OK button and exit
the SETUP menu by pressing the CLEAR button. Exit the SETUP menu by pressing the CLEAR button. To be able to
weigh the items, you must hold down the INFO button for 2 seconds so that switches to the correct menu.
Free weighing mode
The free weighing mode function allows you to weigh various objects without having to make any settings
beforehand. Press and hold the INFO button to enter the free weighing mode. You can change the weight unit
when you press the info button again.
Available weight units:
g = gramm
oz = ounce
Please note that this mode can only be used when reference weighing is deactivated. The maximum load capacity
is 1 kg.
Info: The RS1000 / RS1200 is not a legal-for-trade scale and therefore not approved for weighing marketable
products.
1,2,3...
0.00
g
Quantity Unit /Reference
0 1.78
x
Amount /Sum
0
0.00
g
[EN]
17