Bluetooth Function - Trevi XF 4100 PRO Gebrauchs- Und Anschlusshandbuch

ENGLISH
MIC TONE
Press the MIC button (6) three times and turn the knob (23) to adjust the treble of the microphone, press the MIC button (6) again
and turn the knob (23) to adjust the bass tones, or use the direct buttons M TRE (39) and M BASS (44) on the remote control.
Note: The M TRE and M BASS effect acts solely on microphone inputs.
FLAME DISCO-LIGHT EFFECTS
Press the LIGHT SW button (12) several times, or the LIGHT SW button (47) on the remote control to select the Moving Disco-Light
effect, each press will correspond to a lighting effect.
VOICE ANNOUNCEMENT
Press and hold MODE button (9) on unit or MODE button (52) on remote control to switch ON/OFF the voice announcement.
FM RADIO
1. Switch on the device and select the RADIO function (the frequency indication will appear on the display);
2. Press the P/P button (15) on the unit or the PAUSE PLAY button (35) on remote control to start the automatic search and
storage of the stations (the radio starts an automatic search for radio stations and automatically saves them in the memory).
The number of stored stations depends on the radio signal in your area;
3. Once the scan is complete, use the PREV (18) or NEXT (17) buttons on the unit, or the PREVIOUS (34) and NEXT (49) buttons
on the remote control to move through the saved station
Note:
- FM reception depends a lot on the place where the device is placed.
- The proximity of TV sets, neon lamps or other electrical appliances can cause interference in the reception of radio
programs, in this case move the appliance away.

BLUETOOTH FUNCTION

1. Switch On and press the BT button (10) on unit, or MODE button (52) on remote control to select the Bluetooth function;
2. In Bluetooth mode, the "BLUE" on display will start flashing, the system automatically enters pairing mode;
3. Activate the Bluetooth feature on the external device;
4. Search the devices and select "XF 4100 PRO";
5. Enter the password "0000" if required;
6. Press the P/P button (15) on the unit or PAUSE PLAY (35) button on remote control to start playing, to use PREV (18)
(17) button on unit, or
TWS FUNCTION OPERATION (
TWS technology enables user to make wireless connection between two speakers which are same model and compatible with
TWS. In TWS connection, two speakers will be automatically grouped to be a Stereo- Speaker System which outputs the left and
right channel.
HOW TO ESTABLISH
Notice: Two speakers must be same model and both compatible with TWS.
1. Please switch on both speakers and select "Bluetooth" mode;
2. Press and hold NEXT button (17) on the unit, you will hearing a "beep". It becomes the main speaker (left chennel), which will
automatically search and connect with another speaker (right channel). After connection, you will hear a "beep";
3. Connect mobile phone or Bluetooth player to the speaker by Bluetooth. After connection, you can play music with the TWS
Stereo- Speaker System.
TWS function operates in TWS mode, manipulations to the main speaker will be simultaneously effected in another speaker. For
example, volume adjustement, previous and next song selection, play and pause, power on and off.
Note:
- If the 2 loudspeakers are not paired, switch off both devices and repeat steps 1, 2 and 3.
- The TWS function only works between equal speakers or with other speakers that use the same micro processor or solution
PREVIOUS (34) and NEXT (49) button
True wireless stereo technology)
presets.
on remote control to select a song.
14
XF 4100 PRO
or NEXT