Operation - Kübler CODIX 555 Bedienungsanleitung

All manuals and user guides at all-guides.com
5

Operation

The unit is in the operating mode when the power supply is
switched on or at the end of the setup. One of the following
will be displayed:
30
There is no input measuring signal connected
or the measuring range has been exceeded.
The measuring signal is present, the actual
value will be displayed.
The input signal is below the lower limit of the
measuring range. This display alternates with
the measured value display.
The input signal is higher than the upper limit
of the measuring range. This display alternates
with the measured value display.