Input Parameter For Instantaneous Value - Kübler CODIX 555 Bedienungsanleitung

All manuals and user guides at all-guides.com
Where negative values are permitted, the highest digit will
switch from "9" to "–" , then "–1", and only then to "0".
Press key
Enter value: Press key
next menu item appears.
4.2

Input Parameter for Instantaneous Value

All setups related to the input signal and the corresponding
displayed value are carried out here.
One obtains the displayed value from the input signal through
the characteristic curve.
4.2.1 Select range for the input signal
Menu
1
) In these ranges the limits can be taken over as they are, or
other values within the range can be setup.
2
) In these ranges the limits are fixed to the range limits of
the input signal and cannot be altered.
10
to switch to the next digit.
Selection Enter
2..10 V
-10..+10 V
0..20 mA
4..20 mA
0..10 V
, the value will be stored. The
1
)
1
)
2
)
1
)
2
)