Disassembly The Agitator Axle - Gaspardo PA1 Gebrauch Und Wartung

ENGLISH
fig. 31
fig. 33
4.1.5 DISASSEMBLING THE AGITATOR AXLE
The agitator can be removed from its housing without the use of
tools, with a view to facilitating cleaning operations and replacing
damaged parts.
Doser with hatch and distribution wheel disassembled (Fig. 31).
Remove the various parts of the agitator (Fig. 32).
Remove the agitator (Fig. 33), ensuring that the bearing and
protection disc on the opposite side do not drop down.
Tilting the shaft slightly and pushing inwards, remove the bearing
and the protection disc from their housing (Fig. 34). Repeat this
operation on the other side.
Agitator and support disassembled (Fig. 35). Before proceeding
to re-assemble, thoroughly clean the bearing seats and all the
various parts.
To install the agitator, push it into the opening in the bearing (Fig.
36) ...
44
USE AND MAINTENANCE
fig. 32
fig. 34
fig. 35
fig. 36
g
cod. G19502170