7 - TROUBLE SHOOTING
BEFORE CALLING FOR SERVICE
Before contacting professional service, consult this list.
This list includes common occurrences that are not the result of a defect in workmanship or materials.
PROBLEM
The unit doesn't operate
The dehumidifying
function doesn't work
or the unit turn on / off
frequently
Water leak
Operation is noisy
The display shows LO
Low temperature operation with Auto Defrost function
The appliance is equipped with an automatic defrost function (indicated by the specific led "POWER"
switching on) which, thanks to opportunely timed intervals and by checking room temperature, adjust the
machine operation.
EN - 18
POSSIBLE CAUSES
The supply cord is disconnected.
The tank full warning led is turned on
(tank full or not correctly positioned).
Room temperature exceeding the
maximum work conditions of the
appliance.
Air filter is clogged.
Door or window open.
The air inlet/outlet grilles are clogged.
The set level of humidity is higher than
the level of humidity in the room.
The water tank is too full.
The rubber hose is bent.
The unit is tilted or unsteady.
Air filter is clogged.
Level of humidity in the room lower than
20%.
ADVISED SOLUTIONS
Insert the plug in the power socket and
make sure there's electrical voltage.
Drain water tank and reset your setting,
or replace the water tank to right place.
Self-Protection designed to protect
the unit. Can not work under such
temperature.
Clean the air filter.
Close the door and/or the window.
Remove the obstruction or clean the air
inlet/outlet grilles.
Set a level of humidity lower than the
level of humidity in the room.
Empty the water tank.
Position the hose correctly in order to
avoid the return of water.
Place the appliance on an even, solid
surface (less vibration).
Clean the air filter.
This is normal.
The compressor stops and the fan
keeps running.