Blackout; Installation; Appliance Transport; Warnings - Olimpia splendid SECCOPROF 30 P Hinweise Für Die Verwendung Und Pflege

Defrosting function Led
When the appliance starts defrosting the battery (automatic function), the coloured led lights
up.
Lock function Led
When the control panel is locked, the led lights up in green.
To lock or unlock the control panel, keep the key "MODE" pressed for 5 seconds.

1.5 - BLACKOUT

In case of blackout, the appliance restarts to work in the previously selected conditions when power is
restored.

2 - INSTALLATION

2.1 - APPLIANCE TRANSPORT

• Transport and handling of the appliance must be carried out in vertical position.
• If it is transported in a horizontal position, wait at least one hour before starting it.
• Before moving or transporting the appliance, completely drain condensation by
working as described in paragraph 3.1
CAUTION
Transporting the appliance on delicate floors (for instance: wooden floors):
• Completely drain condensation.
• Pay particular attention while moving the appliance since the wheels may mark the
floor.
Although the wheels are made from a rigid material and are swivelling, they could
get damaged by use or excessive dirt.
It is recommended to check that the wheels are clean and that they can move
freely.

2.2 - WARNINGS

A failure to respect what follows may cause damages to the appliance.
a. Install the appliance on flat, stable and on floor level surfac-
es.
b. Only connect the appliance to outlets equipped with a ground
system.
c. Make sure that curtains or other objects do not obstruct the
air suction filters (Fig.5).
d. Make sure to keep a minimum distance of 20/30 cm between
the appliance and the adjacent objects (Fig.1).
e. The appliance must always be activated paying attention that
there are no obstacles for air suction and output.
EN - 14
Display
• When the appliance is running, it displays the percentage of humidity
in the room.
• During setting of the percentage of humidity (keys "+" and "-") or of
the Timer, if no key is pressed within 5 seconds, the display shows
the percentage of humidity in the room again.
• Press the keys "+" and "-" simultaneously and the display will show
room temperature.