Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3 Function
The alarm siren flash actuator is a Homematic system actuator.
It is used to activate signalling devices in alarm systems, usually com-
bined electronic sirens and flashing lights, via radio-controlled transmit
commands.
These radio-controlled transmit commands can be sent from remote
controls, sensors or the Homematic CCU central control unit.
Features and functions*:
•
Activation of a 12 V siren and a 12 V flashing light
•
Power supply for siren/flashing light from radio-controlled siren/
flashing light actuator. Total power consumption of the connected si-
gnalling devices max. 1 A/12 V. Switching outputs protected against
short circuits.
•
Signal duration preset in accordance with legal requirements: siren:
2 minutes; flashing light: 5 minutes.
•
Power supply for the radio-controlled siren/flashing light actuator
via internal 230 V power supply unit, back-up supply via lead gel
battery 12 V/1.2 Ah.
•
Internal tamper contact provides tamper protection; the alarm will go
off* if the control panel is removed and the device is
disconnected from the mains.
•
Signalling device's tamper contact can be evaluated*.
•
Direct teaching-in of Homematic transmitters, e.g. sensors, is sup-
ported.
•
Internal battery status monitoring with signalling of error states, deep
discharge protection and protection against polarity reversal.
* Some functions are only available in conjunction with the Homematic
central control unit; refer to the manual for further information.
Please ensure that you download the latest Homematic firm-
ware when connecting the actuator to your Homematic central
control unit (a description appears in the instructions for the
central control unit).
23
Werbung
Kapitel
Inhaltsverzeichnis
