Malfunction / cause / action
Black, gray stains
Dishes were in contact with aluminum parts. Use a
mild scouring agent to remove these stains.
Stains on inner pan
Only use cleaning agents without dyes.
White film inside the appliance
Minerals in hard water: Use a damp sponge with
dishwasher detergent. Wear rubber gloves when
doing so.
Error codes
In case of some malfunctions, the appliance displays the following error codes to warn you:
Indicator lights flash
ECO
CAUTION:
• In case of water leakage, close the main valve
before contacting an authorized technician.
• If there is water in the lower part of the housing
due to overfilling or a small leak, remove this wa-
ter before restarting the appliance.
NOTE:
If a problem persists after following the steps above,
contact your distributor or an authorized technician.
Technical data
Electrical connection / water supply........................
Connection voltage: ..................220-240 V~ / 50 Hz
Rated power: .................................1760 – 2100 W
Rated current: .............................................10 A
Water pressure: ................................0.04 – 1 Mpa
Meaning / possible cause
Water supply malfunction!
Faucet not open, inlet blocked or water pressure too low.
Malfunction of the heating element! Rinsing temperature is not reached.
Overflow / water leakage!
Communication error between main and display board.
Malfunction / cause / action
Unsatisfactory drying result
- Incorrect loading.
- Dishes are removed too early.
- Incorrect program selection.
- Use of cutlery with poor coating.
Dimension H x W x D / weight................................
Unit size: ..............................84.5 x 44.8 x 61.0 cm
Net weight: ..........................................ca. 36.0 kg
Available accessory............................................
Inlet hose safety system: .............Art.-No. 8900 410
For more information about the product, scan the QR
code on the supplied energy label and/or visit the
official website of the product data bank:
https://eprel.ec.europa.eu
The right to make technical and design modifications
during continuous product development remains
reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
39