Intended Use; General Power Tool Safety Warnings; Work Area Safety; English (Original Instructions) - Black & Decker MTOS4 Bersetzt Von Den Originalanweisungen

A
B
(Original instructions)

Intended use

Your BLACK+DECKER multi-purpose tool has been designed
for a wide range of DIY applications.Using the oscillating tool
head (MTOS4), this toolis intended forDIY applications such
as sanding operations. It is also suitable for cutting wooden
materials, plastic, gypsum, non-ferrous metals and fastening
elements (e.g., unhardened nails, staples), working soft wall
tiles and scraping of small surfaces. This tool is intended for
consumer use only. Safety instructions
@

General power tool safety warnings

Warning! Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool".

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapt-
er plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
d. Do not abuse the cord. Never use the cord for car-
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
C a cord suitable for outdoor use reduces the risk of
electric shock.
ENGLISH
3