Electrical system
7.5
Additional fuse for the living room battery
The living room battery of the vehicle may additionally be equipped with a back-up fuse.
In this case, the fuse holder is located directly on the battery supply line.
7.6
Establishing the 230 V
power supply
When you have arrived at your destination, you
should connect to the 230 V power supply immedi-
ately. For this, the vehicle has to be connected to the
230 V power supply using the CEE connector on the
outside of the vehicle.
We recommend using a three-core supply cable with
a sufficient cross-section (3 x 2.5 mm²) and a max.
length of 25 m. This cable must be equipped with
a connecting fitting that is protected against spray
water (230 V/16 A).
Please ensure that the male and female connectors
are fully connected (pushed in to the stop) and that
the flap on the female connector comes to rest on
the male connector and engages.
EN 46
Additional fuse for the living room battery (sample illustration)
CEE power supply connector (230 V)
on the outside of the vehicle (sample illustration)