Opening The Enclosures; Ind131 Din And Ind331 Panel-Mount - Mettler Toledo IND131 Installationshandbuch

Chapter 2.0
Installation
This Chapter covers
•

Opening the Enclosures

• Mounting the Terminals
•
Installing Cables and
Connectors
• Main Board Wiring
Connections
• PCB Switch Settings
•
Capacity Label Instructions
• Metrological sealing
Opening the Enclosures
Procedures for opening the various configurations of the IND131 and IND331
terminals differ, and are shown in the following sections.

IND131 DIN and IND331 Panel-mount

The front of the DIN enclosure is attached to the rear housing by two snap in place
tabs. Both tabs must be released simultaneously before the front can be slid out of
the housing.
This chapter provides installation instructions for the IND131 and
IND331 terminals. Please read this chapter thoroughly before
beginning installation.
2-1