4. The decimal points of the clock (3) are flashing.
5. The operational status indicator "
6. The indicator "
7. The display indicates 00:00.
8. Set the desired countdown time using the buttons
9. If the desired countdown time is displayed, release the
10. The cooking process starts immediately and the countdown starts a few
seconds later.
11. If the countdown time has elapsed, an acoustic signal sounds and the oven will
be switched off automatically.
12. The indicator "
flashing.
13. You can switch off the acoustic signal by pressing any button on the display.
14. To switch off the oven, the rotary knob for the selection of the oven
functions (A) and the rotary knob for the selection of the temperature (C)
must be set to position
❖ After using the semi-automatic cooking / baking function the oven must be reset
to standard mode.
1. Press the programme button
2. The display indicates the time of the day.
3. Press the programme button
4. The operational status indicator "
5. The indicator "
6. The oven is ready for operation again.
CAUTION! To switch off the oven completely the rotary knobs of the
oven function and of the temperature control must be set to position 0. If
the rotary knobs are not set to position 0 while resetting the oven, the oven
starts to heat again.
3.4.3 Setting of the end of the cooking / baking time
❖ This function allows you to select the time of the day by which the oven will be
switched off automatically.
❖ The maximum settable time of the day for the end of the cooking / baking time
is 10 hours from the current time of the day.
Description of the respective numerations: s. chapter 3.2.4 D
AUTOMATIC COOKING
AUTOMATIC COOKING
0
.
H
OW TO RESET THE OVEN
AUTOMATIC COOKING
" (2) on the display goes on.
OVEN IN USE
" (1) goes on.
+
" (1) and the indicator of the
(6) once for 3 seconds.
(6) one more time for 3 seconds.
" (2) on the display goes on.
OVEN IN USE
" (1) goes off.
50
-
(5) and / or
(7).
+
-
/
buttons.
TIMER
:
ISPLAY
(4) are