Replacing Of The Illuminant; Removing Of The Guides - Pkm KH-F7-2 DIGI Bedienungsanleitung

➢ Dry after cleaning.
➢ Clean the outside of the oven with warm soapy water. Use a sponge or a soft
cloth. Never use abrasive or aggressive detergents.
➢ If you use a special oven-detergent, check that the detergent is suitable for your
appliance ( instructions on the packaging of the detergent).
➢ Any damage that is caused to the appliance by a cleaning product will not be
fixed free of charge, even if the guarantee period of the appliance is still valid.
➢ Clean the door very carefully. Do not use any abrasive detergents; otherwise
you may damage or brake the glass. Use wash-up liquid and warm water.

4.1 Replacing of the illuminant

1. Switch off the appliance and disconnect it
from the mains.
2. Unscrew and wash the lamp cover and wipe it
dry.
3. Remove the illuminant and replace it by a new
one of the same kind and power:
➢ Heat-proof illuminant for ovens (300
240V/25W/G9 thread /50 Hz.
4. Do not use any other type of bulb
5. Screw the bulb in, making sure it is properly
inserted into the ceramic socket.
6. Screw in the lamp cover.

4.2 Removing of the guides

1. Unscrew the screws of the guides.
2. Rotate the guide vertically to make it leave the side panel.
3. Take the guide out of the side panel hole, using an approx. 45
guide and side panel.
Never use a steam cleaner.
Oven-door
C), 200-
0
57
angle between the
0