Fronius Ohmpilot Bedienungsanleitung Seite 100

Example 2: If "Feed-in" has been selected under the switch-off threshold and a
power of 500 W has been entered, the heat pump will be switched off as soon as
the power being fed in is less than 500 W.
NOTE!
The heat pump must be connected to the same Fronius Smart Meter.
Between the switch-on and switch-off thresholds, the self-consumption of the
heat pump must also be taken into consideration. For example, if the heat pump
consumes 3000 watts of electricity and a hysteresis of 500 watts must be taken
into account, the switch-on threshold can be set to feed-in 3000 watts and the
switch-off threshold to purchase 500 watts.
100