GYS SUPER PRO SMART Betriebsanleitung Seite 12

Operating manual
LIST OF AVAILABLE OPTIONS
Adaptor
Schuko
Swiss T13
GB / UK
CEE 16 Single-phase
CEE 32 Single-phase
CEE 16 Three-phase
CEE 32 Three-phase
TROUBLESHOOTING
Troubleshooting
+
+
+
12
Translation of the original
instructions
Disconnect the device from the power supply.
Limitation
10 A
8 A
13 A
16 A
32 A
16 A
32 A
Causes
Electrical fault.
Residual current detected in
electrical installation (>30mA).
Accessory fault.
Thermal protection.
Network
Single-phase 2.3 kW max
Single-phase 1.8 kW max
Single-phase 3 kW max
Single-phase 3.7 kW max
Single-phase 7.4 kW max
Three-phase 11 kW max
Three-phase 22 kW max
- Check your electrical installation and follow
the relevant electrical recommendations for
this type of product.
This error will only disappear after the
electrical installation has been brought into
conformity.
- The attachment connected to the device is
not a GYS accessory.
- Defect in the accessory. Contact your
dealer / service agent.
- Ambient temperature too high, ventilate the
room and let the charger cool down.
The load will automatically restart as soon
as the temperature is lower.
SUPER PRO SMART EV CHARGE
Power
Solutions