Tools; Diamond Blades, Drums, And Spacers - Von Arx DTF 35 SH Betriebsanleitung

DTF 35 SH • Operating Manual

TOOLS

The right tool for your particular application can be best determined by tests. The following
description only gives guide values. Always use the proper tools provided by the manufacturer
to achieve the desired results.

Diamond blades, drums, and spacers

Shaft (Fig. 1).
Diamond blades for shaft mounting. Recommended for 15 kW version (Fig. 2)
Blades are available in 2 variations
1. Yellow - for hard concrete
2. Blue - for regular concrete
Fig� 1
Drum (Fig. 3). Recommended for 22 kW and 25 kW versions
Diamond blades for drum mounting (Fig. 4)
Blades are available in 2 variations
1. Yellow - for hard concrete
2. Blue - for regular concrete
Fig� 3
Spacers for shaft (Fig. 5) and spacers for drum (Fig. 6)
Spacers are available in 3 variations. Thickness: 2mm / 4mm / 5mm
Fig� 5
The right tool for your particular application can best be determined by tests.
Fig� 2
1
Fig� 4
1
Fig� 6
Tools
2
2
9