Von Arx DTF 35 SH Betriebsanleitung Seite 12

DTF 35 SH • Operating Manual
4
Mounting the drum (applicable for 22 kW and 25 kW versions)
Pull out the mains plug for electrical motors or stop the internal combustion engine.
1. Remove the cover nuts from the cover.
2. Remove the cover using the supplied wing screws.
3. Place the pre-configured with blades and spacers drum on the shaft.
4. Tighten the nut on the shaft using the supplied key.
5. Tighten the countersunk nut on the shaft using the supplied key.
6. Place the cover back and fasten the nuts.
1
4
12
5
2
5
Operation
6
3
6