Guarantee & Service - Gorenje B1400BE Gebrauchsanweisung

NOTE: The speed can not adjusted by the
"Speed knob" when the appliance is running
under the "Ice crush" mode.
NOTE: During the working process of crushing
ice, if you want to make the appliance stop
working, you can press "Ice crush" button again
or turn the "Speed knob" to "OFF" position.
During working, you can remove the measuring
cup and then add ingredients into the jar through
the center opening of jar cover during operation,
and then replace measuring cup.
NOTE: You'd better not remove the jar from the
motor unit during working process. If it is
necessary to remove the jar, please firstly turn
off the appliance to make it stop working and
then remove it.
CAUTION: Do not operate the appliance for
more than 3 minutes per time and minimum 30-
minute rest time must be maintained between
continuous two cycles.
After finish crushing ice, the appliance will stop
working automatically and the indicators of three
buttons will turn to blink.
Unplug the appliance and then remove the jar
from the motor unit, carefully remove the jar
cover, then pour and serve.
CAUTION: The appliance must be unplugged
before removing the jar.
Handy Blending Hints
• A brief whirl in the blender will rescue a lumpy
gravy, or an eggs-based sauce that has
separated.
• Food items for blending should be cut into cubes
(approximately 2-3cm), this will assist in achieving
an even result.
• Never fill the blender jug above the maximum
level indicated.
• To ensure efficient mixing when blending dry
mixtures, it may be necessary to stop the blender
and push ingredients down the sides of the jug
with a spatula.
• When pureeing fruit or vegetable, cooked or raw,
cut into small pieces to facilitate blending.
• When blending a variety of ingredients together,
blend the liquids, first, then add dry ingredients.
• Always ensure stones are removed from fruit and
bones from meat as these can harm the blades.
• Do not process hot liquids in your blender. Allows
to cool before processing.
Always ventilate the blender jug when pureeing
warm ingredients. This is achieved by lifting the
ingredient cup out of the lid, after starting the
blender.
Care annd Cleaning
Quick cleaning method
1. Half fill the blender with warm and a small
amount of detergent.
2. Press the 'Pulse' function and hold for 1-2
seconds and release. Repeat 3-4 times.
3. Then remove the jug and rinse it under running
water.
For thorough cleaning
1. Unscrew the blade assembly from the blender
jug by turning the bottom of the blade assembly
in an anti-clockwise direction.
2. Remove the rubber seal from the blade
assembly.
3. Wash the blender lid, ingredient cup, rubber seal,
blade assembly and blender jug in warm soapy
water.
Caution: Take care when cleaning the blades as
they are extremely sharp.
Note: Do not clean any part of the blender in the
dishwasher.
To clean the motor base
Use a damp, soft sponge with detergent and wipe
over the motor base.
Note: Never immerse the motor base in water.
Environment
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in
at an official collection point for recycling. By doing
this, you help to preserve the environment.
Guarantee & service
If you need information or if you have a problem,
please contact the Gorenje Customer Care Centre
in your country (you find its phone number in the
worldwide guarantee leaflet). If there is no Customer
Care Centre in your country, go to your local
Gorenje dealer or contact the Service department of
Gorenje domestic appliances.
For personal use only!
WISHES YOU A LOT OF PLEASURE
WHEN USING YOUR APPLIANCE
We reserve the right to any modifications!
25
GORENJE