Inhaltsverzeichnis
Werbung
There are various types of wheels for a wide range of applications,
in three different product families (Fig. 29):
5 wheels, 8 chambers per wheel, (mod. G1000 - red).
(A)
Normal seeds distribution over 200 Kg/Ha.
5 wheels, 16 chambers per wheel (mod. N500 - green).
(B)
Normal seeds distribution up to 200 Kg/Ha.
5 wheels, 32 chambers per wheel, (mod. F25-125 - yellow).
(C)
Fine seeds distribution.
As described above, remove the round belt of the agitator, then
screw the handwheel to the side of the dosing roller (Fig. 30) and
proceed when the machine is completely empty.
Once the fastening knob of the dosing roller has been released,
it remains connected to the doser casing, in order to safeguard
against it being accidentally lost.
Slide the dosing roller out sideways (Fig. 31) and remove it from
the doser (Fig. 32).
To re-assemble, follow the steps in reverse order.
During the assembly phase, rotate the dosing roller in the driving direction and push it into the doser (Fig. 33), until the drive pin engages
in the gearbox (Fig. 34).
To start up the agitator, fi rst fi t the belt on the small agitator disc, then apply pressure to the lower edge of the dosing roller and, on the
opposite side, rotate the dosing roller on the handwheel, in the driving direction until the belt comes off (Fg. 35).
fi g. 30
fi g. 33
cod. G19503231
USE AND MAINTENANCE
fi g. 29
fi g. 31
fi g. 34
A
C
fi g. 32
fi g. 35
ENGLISH
B
EN - 65
Werbung
Inhaltsverzeichnis
