Parkside PLV 1500 C2 Originalbetriebsanleitung Seite 30

GB
seconds. Keep hands and feet
well away.
• Do not touch the spring tines be-
fore the implement has been dis-
connected from the mains and
the spring tines have come to a
complete standstill. Risk of injury
owing to a sharp implement!
• Only remove plant parts when
the implement is standing
completely still. Ensure that the
grass ejector opening is clean
and free.
• Switch off the power when the
implement is to be transported,
lifted or tilted and when travers-
ing other surfaces than grass.
• Children must never play with
the device.
• Always switch off the implement
and disconnect the power plug.
Make sure that all moving parts
have come to a complete stop:
- Whenever you leave the im-
plement
- Before you clean the ejector
opening or unblock or unclog
the implement
- When the implement is not
being used
- Before checking, cleaning or
working on the machine;
- When the power cable is dam-
aged or has become tangled
- After contact with a foreign
object. Examine the machine
for damage and carry out the
necessary repairs before re-
starting and working with the
machine.
If the machine starts to vibrate
abnormally, an immediate
check must be carried out,
- search for signs of damage;
30
- have any necessary repairs
carried out on damaged parts;
- examine for loose parts and
tighten these.
• Store the implement in a dry
place well out of reach of
children.
CAUTION! The following
states how to avoid damage
to the implement and any re-
sulting harm to people:
Take care of your implement:
• Switch off the power when
the implement is to be carried
across steps.
• Before switching on the ma-
chine, always check whether
all screws, nuts, bolts and other
fasteners are tightly secured
and that the protection devices
and protective gratings are in
place. Worn or damaged la-
bels must be replaced. Never
operate the implement if safety
devices (e.g. impact protector,
parts of the cutting facility or
bolts are missing, worn out or
damaged. Check especially the
power cable and starting lever
for damage. To avoid imbal-
ance, all tools and bolts must
be exchanged as complete sets.
• Never operate the machine
with defective guards or covers
or without protection or with
damaged or worn cables.
• Only use spare parts and acces-
sories that have been supplied
or recommended by the manu-
facturer. The use of alien parts
results in the immediate loss of
all guarantee claims.