Dry Cleaning - Panasonic ES-EY90 Betriebsanleitung

Cleaning
• Always clean the heads and caps after
use.
• Switch off and unplug the appliance
before cleaning.
• Take care not to damage the skin
protector, frame, or caps for legs/arms
and for underarms/bikini-line during
cleaning.

Dry cleaning

Epilation head /
Shaver head
1� Lift the caps and frame upward
while holding the edge of the cap
[ ]/the frame release ribs [
A B C
or remove the frame by pushing the
frame release button [
2� Clean the caps [
head [ ], small epilation head for
D
underarms/bikini-line [
shaver head [
G
brush [ ]� (Fig� 20)
N
Wet cleaning
Epilation head /
Shaver head
(Fig� 21)
1� Wet the discs and blades, and then
apply liquid hand soap.
2� Turn the switch on to create foam�
3. Rinse away all pieces of hair and dirt.
• Do not use hot water.
• Remove the frame before rinsing the
shaver head.
4� Turn the switch off, wipe the
appliance with a dry cloth and dry it
well�
18
ES-EY90
E
]� (Fig� 19)
G
], epilation
A B C
] and
E
] with the cleaning
ES-EY90
Foot care head
(Fig� 22)
1. Apply liquid hand soap to the
centre of the file.
2� Pour a small amount of water on
the file and turn on the power.
3. Thoroughly rinse away any debris.
4� Turn off the power, remove the
frame, and rinse inside�
5. Wipe dry and air dry in a well‑
ventilated location�
Scrub brush
Brush head
(Fig� 23)
1. Turn on the power and thoroughly
rinse debris from the scrub brush�
2� Turn off the power, remove the
4]
brush head, and thoroughly rinse
the underside of the brush head�
3. Wipe the appliance with a dry cloth
and dry it well.
• To prevent brush deformation, dry it
facing upward, and then store it.
ES-EY90/EY80/EY70
ES-EY90/EY80
/
ES-EY90/EY80