Inhaltsverzeichnis
Werbung
1)
Read these instructions.
2)
Keep these instructions.
3)
Heed all warnings.
4)
Follow all instructions.
Do not use this apparatus near water.
5)
6)
Clean only with dry cloth.
7)
Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
8)
Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9)
Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10)
Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Product Name: DJ MIXER
Model Number: DJM-A9
Responsible Party Name: AlphaTheta Music Americas, Inc. OPERATIONS
DIVISION
Address: 2050 W. 190th Street, Suite 109, Torrance, CA 90504,
U.S.A.
Phone: 1-424-488-0480
URL: pioneerdj.com
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Information to User
Alterations or modifications carried out without appropriate authorization may
invalidate the user's right to operate the equipment.
CAUTION
This product satisfies FCC regulations when shielded cables and connectors are
used to connect the unit to other equipment. To prevent electromagnetic interference
with electric appliances such as radios and televisions, use shielded cables and
connectors for connections.
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
5.15 GHz - 5.25 GHz band is restricted to indoor operations only.
11)
Only use attachments/accessories specified by
the manufacturer.
12)
Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13)
Unplug this apparatus during lightning storms or
when unused for long periods of time.
14)
Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines. This equipment should be installed and operated keeping the radiator at
least 20 cm or more away from person's body (excluding extremities: hands, wrists,
feet and ankles).
For Canada
This device complies with Innovation, Science and Economic Development Canada's
licence-exempt RSSs. Operation is subject to the following two conditions: (1) This
device may not cause interference; and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
D8-10-4*_C1_En
5.15 GHz - 5.25 GHz band is restricted to indoor operations only.
High-power radars are allocated as primary users (i.e. priority users) of the bands
5.25 GHz – 5.35 GHz and 5.65 GHz – 5.85 GHz and that these radars could cause
interference and/or damage to LE-LAN devices.
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF)
Exposure rules. This equipment should be installed and operated keeping the
radiator at least 20cm or more away from person's body (excluding extremities:
hands, wrists, feet and ankles).
Specifications
General
Power requirements .......................................................AC 110 V – 240 V, 50 Hz / 60 Hz
D8-10-1-2_A1_En
Power consumption ..................................................................................................61 W
Main unit weight .................................................................................... 10.2 kg / 22.5 lbs.
Max. external dimensions
...................................... (W × D × H) 407.4 × 458.3 × 107.9 mm / 16.04" × 18.04" × 4.25"
Max. external dimensions (when the wireless antenna stands upright)
D8-10-2_A1_En
.........................................(W × D × H) 407.4 × 458.3 × 140.7 mm / 16.04" × 18.04" × 5.54"
Tolerable operating temperature ................................... +5 °C – +35 °C (+41 °F – +95 °F)
Tolerable operating humidity ..............................................5 % – 85 % (no condensation)
Audio Section
Sampling rate ........................................................................................................ 96 kHz
MASTER, BOOTH, REC, SEND D/A converter ........................................................ 32bit
D8-10-3a_A1_En
CH input A/D converter ............................................................................................. 32bit
Other A/D and D/A converters................................................................................... 24bit
Frequency characteristic
LINE ................................................................................................... 20 Hz – 40 kHz
S / N ratio (rated output, A-WEIGHTED)
USB, DIGITAL IN ............................................................................................114 dB
PHONO .............................................................................................................88 dB
LINE ................................................................................................................105 dB
MIC 1, MIC 2 .....................................................................................................79 dB
Total harmonic distortion (LINE — MASTER 1, 20 Hz – 40 kHzBW) ................... 0.005 %
D3-7-13-69_En
3
Werbung
Inhaltsverzeichnis
