Geberit HS01 Betriebsanleitung Seite 43

Malfunction
Does not flush.
Water runs
continuously.
1)
Flush actuations will no longer take place if the battery is almost dead.
Skilled persons will find further information on
troubleshooting in the maintenance manual
970.124.00.0 on the website of the respective Geberit
sales company or via the adjacent QR code.
45036003973654923 © 09-2022
970.123.00.0(01)
Cause
Solenoid valve or
control unit
defective
Battery dead
Pipe pressure too
low
Basket filter
clogged
Solenoid valve or
control unit
defective
Rectification
▶
Contact a skilled person.
▶
Replace the battery. →
See "Replacing the
battery", page 45.
▶
Contact a skilled person.
▶
Contact a skilled person.
▶
Close the water tap.
▶
Contact a skilled person.
EN
43