Wifi - Pelgrim GVWC390XL Gebrauchsanweisung

WiFi

Problem
The dishwasher's network sym-
bol does not appear on the
display.
Connection setup failed
Add device failed
The dishwasher is shown as
disconnected in the Connect
Life app.
Software update failed.
42
Possible causes
The dishwasher is not connec-
ted to your wireless network.
WiFi connection is deactivated.
The dishwasher cannot access
your wireless network. Or the
router is not connected to the
internet.
Your smartphone/tablet is not
connected to your wireless net-
work. Or the router is not con-
nected to the internet.
WiFi connection is deactivated.
The network connection was
lost or the dishwasher lost
power due to a power failure.
Action
Connect the dishwasher to your
wireless network. See the
chapter WiFi connection.
Activate WiFi connection.
See WiFi connection Off / WiFi
connection On in the chapter
WiFi connection.
Check that the router is connec-
ted to the internet.
Make sure your wireless net-
work is using 2.4 GHz and is
visible. Try moving the router
closer to the dishwasher if the
signal is too weak.
See also troubleshooting at
www.connectlife.io.
If the problem persists, contact
your nearest service centre.
Check that the router is connec-
ted to the internet.
Check that your smartphone/tab-
let is connected to your wireless
network.
See also troubleshooting at
www.connectlife.io.
If the problem persists, contact
your nearest service centre.
Activate WiFi connection.
See WiFi connection Off / WiFi
connection On in the chapter
WiFi connection.
See also troubleshooting at
www.connectlife.io.
If the problem persists, contact
your nearest service centre.
Make sure that the power sup-
ply is not interrupted and that
the network connection is stable
before trying again. If the prob-
lem persists, contact your
nearest service centre.