Start/Stop; Status Light - Pelgrim GVWC390XL Gebrauchsanweisung

WARNING!
The dishwasher door must not be blocked or closed when opened automatically. Doing so may
damage the door lock mechanism. Wait at least 5 minutes before closing the door.
Delayed start
When you select Delayed start, the dishwasher will start 1-24 hours after you have pressed
closed the door.
1. Press
once to activate Delayed start. Press several times, or hold it in, to set the desired number
of hours.
2. Press
and close the door. The timer counts down and the dishwasher starts after the selected
delay.
If you want to cancel the Delayed start option, open the door then press and hold

Start/Stop

Press until the display shows "Program started, close door". This indicates that the dishwasher
is ready to start. Close the door properly, otherwise the dishwasher will not start.
If the dishwasher is not started or the door is not closed within 2 minutes of the last time the control
panel was pressed, the machine switches off.
To remote start the dishwasher, see the chapter WiFi connection.
Stopping or changing a program
If you want to change program after starting the dishwasher, open the door then press and hold
for three seconds. Add more detergent if the lid of the detergent dispenser has opened. Then select
a new program, press
Remaining time
Once you have selected a program, program mode and options, the time the program took when last
used is displayed.

Status light

The status light at the bottom on the dishwasher provides information by means of 3 different colours.
Status light
Blue - Load more
The program has started, but you can still load more dishes.
and close the door.
and
for three seconds.
23