Maintenance; Preparation; Cleaning - Puqpress Mini Bedienungsanleitung

6

MAINTENANCE

Your PUQpress is now in use. Now you only
need to maintain the PUQpress to keep
creating the perfect coffee! Refer to the
chapter 'Safety instructions' for more
information.
6.1

Preparation

6.1.1 Tools and materials
Required tools and materials
• Allen key
Provided tools and materials
Brush
•
• Damp cloth
• Dry cloth
6.2

Cleaning

Clean the housing of the PUQpress with a
damp cloth.
Refer to the table for an overview of the
cleaning intervals.
NOTICE
Make sure to clean the parts of the PUQpress
following the cleaning intervals. Not doing so
may result in parts of the PUQpress getting
damaged.
Part Cleaning
method
Tamper base Dry cloth
(bottom)
Tamper base
(whole)
Upper clamp
cavity (when
tamper base is
removed)
Contactless
sensor
6.2.1 Cleaning the tamper base
Clean the tamper base regularly:
1. Press the set button. The tamper base
2. Remove the lid of the PUQpress.
3. Unscrew the tamper base bolt by turning
4. Remove the bolt.
5. Unscrew the tamper base by turning it
6. Clean the tamper base using a brush or
6
Make sure not to use a damp/wet cloth to
clean the tamper base. Grounded coffee will
stick to the tamper base.
7. Screw the tamper base back by turning
8. Place the bolt.
9. Screw the bolt back by turning the Allen
Cleaning
interval
10. Place the lid of the PUQpress.
Daily
11. Press the set button again. The tamper
16
Dry cloth
Dry cloth
Brush
moves down in the cleaning position.
the Allen key counter-clockwise. ��
counter-clockwise. ��
dry cloth.
CAUTION
it clockwise. ��
key clockwise. ��
base moves upwards to the original
position.
Weekly
Weekly
Daily