Configuring The Product - Sygonix 2588867 Bedienungsanleitung

14.4 Configuring the product

The camera must be turned on and connected to the mobile network. The status
LED (G) must flash blue.
For configuration, your smartphone must be connected to the Internet (prefer-
ably via Wi-Fi).
Important: The mobile signal should be stable at the place of installation. If
you have problems setting up the camera, change its location. We also recom-
mend that you operate the camera outdoors.
You can add a new device manually by tapping "+" (A14) on the top right of the
app's main page and selecting the device you want to add. Otherwise, tap the
blue button (A4) below in the middle.
Scan the QR code on the camera
to add the camera in the app.
To scan the QR code, tap the but-
ton in the top right corner of the
screen (arrow in the screenshot).
Use your smartphone to scan the
QR code attached to the side of
the camera.
The camera beeps when the
QR code has been read by your
smartphone and is then added
automatically.
56