SICK deTem2 Core A/P Montageanleitung Seite 15

5.1 Mounting the QuickFix bracket
5.2 Mounting the FlexFix bracket
8024797/1GWI/2022-11-09 | SICK
Subject to change without notice
Dimensions based on the number of beams, passive unit for small scanning range
Number of beams
2
4
Dimensional drawing: D
Dimensions based on the number of beams, passive unit for large scanning ranges
Number of beams Beam separation
Dimension S1 in mm
2 500
4 -
Side and rear mounting with the QuickFix bracket
Mounting Description
method
On the side Fasten the M5 screw to the machine or profile frame through the QuickFix
bracket. A screw nut or threaded hole is required on the machine or profile
frame (1).
Fasten the M5 screw to the QuickFix bracket through the machine or profile
frame. A screw nut is required for each QuickFix bracket (2).
Fasten the M5 screw to the profile frame through the QuickFix bracket. A
sliding nut is required on the profile frame (3).
On the back Fasten the M5 screw to the machine or profile frame through the QuickFix
bracket. A screw nut or threaded hole is required on the machine or profile
frame (4).
Tightening torque: 5 Nm ... 6 Nm
Secure the active and passive unit in the bracket
1. Insert the housing of the active and passive unit into the bracket so that it fits
snugly.
2. Secure the position of the active and passive unit in the bracket using the M5
screw.
Torque: 2.5 Nm to 3 Nm
Mounting: E
Lateral and rear mounting with the FlexFix bracket
Mounting Description
method
On the side With the M5 screw through the FlexFix bracket on the machine or profile
frame. A screw nut or threaded hole is required on the machine or profile
frame (1).
With the M5 screw through the FlexFix bracket on the profile frame. 2 sliding
nuts are required on the profile frame (2).
On the back With the M5 screw through the FlexFix bracket on the machine or profile
frame. A screw nut or threaded hole is required on the machine or profile
frame (3).
MOUNTING INSTRUCTIONS
Beam separation, dimension
S in mm
500
300
Dimension S2 in mm
-
300
M O U N T I N G I N S T R U C T I O N S | deTem2 Core A/P, deTem4 Core A/P
Length, dimension L in mm
672
1072
Length, dimension L
in mm
528.4
928.4
en
15