Analyzing The Connection Quality In Ad-Hoc Mode - Sirona CEREC 3 Installationsanleitung

6 Connection test and analysis
Analyzing the connection quality in Ad-hoc Mode Installation instructions for WLAN card LINKSYS WMP54GS CEREC 3 Acquisition Unit
20
Fig. 6-4 Communication
Click the "Start" button.
6.
Stop the test after approx. 50 test runs. Click the "Stop" button.
7.
The average data transmission time should be less than 500ms; otherwise
you must change channels (see "Changing channels in the Infrastructure
mode" [ 24]).
6.3 Analyzing the connection quality in Ad-
hoc Mode
The PC and the milling unit are switched off.
1. Position the PC near the milling unit (1-2 m away).
2. Switch the PC and the milling unit on.
Sirona Dental Systems GmbH
61 90 602 D 3344
D 3344.092.16.01.02 09.2007