Tips For The Super Short Programme - Miele PFD 402 Gebrauchsanweisung

The level markers in the powder container
with the door in the horizontal position in-
dicate the fill level in millilitres (ml). The max.
capacity is approx. 60 ml of cleaning agent.
The amount in ml equates to approx. the
amount normally recommended in grams (g)
for proprietary powder cleaning agents.
Powder density (grain size) can affect this
amount.
Dispensing example:
Approx. 8,5 litres of water are taken into
the machine for the main wash. With a
cleaning agent concentration of approx.
3 g/l, you will need approx. 25 g of clean-
ing agent. Please observe manufacturer's
recommendations, which may vary!
Add the cleaning agent to the dispenser.

Close the flap.

en - Cleaning agent and rinsing agent
 Make sure that all of the cleaning
agent has dissolved at the end of the pro-
gramme.
Repeat the programme if residual clean-
ing agent is present.
Check whether any load items have pre-
vented the flushing out of the dispenser
container and rearrange the load items if
necessary.
Tips for the Super Short programme
Super Short
With the
on the model), the final rinse water is not
pumped away at the end of the programme
in order to achieve short programme run-
ning times in continuous use.
Cleaning agent cannot be rinsed out of the
dispenser during the short programme time.
If liquid cleaning agent dispensing is not

being used, add powder cleaning agent
directly onto the inside of the door.
To avoid corrosion or discolouration, start
the wash programme immediately after
dispensing cleaning agent directly onto
the inside of the door.
programme (depending
61