SFA Sanipump VX 50 Bedienungs- Und Installationsanleitung Seite 55

10 If included in agreed scope of supply
1 General
1 General
1.1 Principles
This operating manual is valid for the type series and variants indicated on the front
cover.
The operating manual describes the proper and safe use of this equipment in all
phases of operation.
The name plate indicates the type series and size, the main operating data, the order
number and the order item number. The order number and order item number
clearly identify the pump set and serve as identification for all further business
processes.
In the event of damage, immediately contact your nearest SFA service facility to
maintain the right to claim under warranty.
1.2 Installation of partly completed machinery
To install partly completed machinery supplied by SFA refer to the sub-sections under
Servicing/Maintenance.
1.3 Target group
This operating manual is aimed at the target group of trained and qualified specialist
technical personnel. (ð Section 2.3, Page 57)
1.4 Other applicable documents
Table 1: Overview of other applicable documents
Document
Data sheet
General arrangement drawing /
outline drawing
Hydraulic characteristic curve
General assembly drawing
10)
Spare parts lists
Supplementary operating
10)
manual
For accessories and/or integrated machinery components, observe the relevant
manufacturer's product literature.
1.5 Symbols
Table 2: Symbols used in this manual
Symbol Description
✓ Conditions which need to be fulfilled before proceeding with the
step-by-step instructions
Safety instructions
⊳
Result of an action
⇨
⇨ Cross-references
Sanipump VX 50
Contents
Description of the technical data of the pump (set)
Description of mating dimensions and installation
dimensions for the pump (set), weights
Characteristic curves showing head, flow rate,
efficiency and power input
10)
Sectional drawing of the pump
Description of spare parts
Installation/operating manual Installation Parts for
Stationary Wet Installation
53 of 331