User Instructions
2.2. Setting of the hinge
2.2.1. Adjusting the position of the redression and limitation range
for CDS
Elbow Braces Flexion L/L, M/M, S/S and Junior
®
The
CDS
Elbow Braces Flexion
®
360° hinge. In the 360° hinge, the position of the spring housing is adjustable on relation to the
upper arm rod. The position of the redression and limtation range can be thereby altered and
adjusted to the patient. The position of the stops depends on the position of the redression and
limitation range.
1
Remove the pad.
2
Remove the two screws.
3
You can adjust the position of the redression
range in 15° steps.
Use a gonimometer to determine the
1 1
3 3
L/L, M/M, S/S and Junior are constructed on the basis of the
desired position and adjust the hinge
accordingly.
4
Insert the screws again and thighten them.
5
Insert the pad again.
2
2
4 4
2 2
5 5
www.albrechtgmbh.com
37