Specifications - Shindaiwa T303TS Bedienungsanleitung

Specifications

External dimensions: Length × Width × Height (without cutting at-
tachment)
Mass:
Unit without fuel, cutting attachment and harness (ISO11806-1: 2011)
Unit with fuel, specified cutting attachment, guard and harness
Unit without fuel, cutting attachment, guard and harness
Volume: Fuel tank (full)
Fuel: Gasoline
Oil
Mixture ratio
Cutting attachment:
Nylon line cutting head (Cutting swath)
Thread
Nylon cord size (diameter)
Nylon cord length
Gear Case: Gear ratio and lubrication
Rotational direction of output shaft viewed from above
maximum rotational frequency of the spindle
Engine: Type
Carburettor
Magneto
Spark plug
Starter
Power transmission
Engine displacement
Maximum shaft brake power (ISO 8893)
Fuel consumption at maximum engine power
Recommended maximum engine speed (With STD attachment in-
stalled)
Recommended engine idling speed
2006/42/EC
Vibration (ISO 22867) a
hv,eq
Sound pressure level (ISO 22868) LpAeq
Sound power level (ISO 22868) L
These specifications are subject to change without notice.
Left handle
Right handle
Uncertainty K
Uncertainty K
WARa
Uncertainty K
Specifications
T303TS
1799 × 350 × 349 mm
6.4 kg
7.4 kg
5.9 kg
710 mL
Regular grade petrol. Minimum 89 Octane unleaded
petrol is recommended. Do not use fuel containing me-
thyl alcohol or more than 10% of ethyl alcohol.
Two stroke, air-cooled engine oil. ISO-L-EGD Standard
(ISO 13738), JASO FC,FD grade and shindaiwa recom-
mended oil.
50:1 part (2%)
SF400 (508)
Left-handed thread M10×1.25 pitch
2.4 mm
3.5 m
1.62 reduction and good quality lithium grease
Anticlockwise
7720 r/min
Air cooled two stroke, single cylinder
Diaphragm type
Flywheel magneto - CDI system
NGK CMR7H
Recoil starter
Automatic centrifugal clutch
3
30.5 cm
1.3 kW
0.72 L/h
10100 r/min
2900 (-100~0) r/min
2
3.5 m/s
2
2.6 m/s
2
1.2 m/s
94.9 dB(A)
1.5 dB(A)
pA
107.0 dB(A)
2.1 dB(A)
WA
28
C303TS
1799 × 646 × 569 mm
6.5 kg
8.1 kg
6.0 kg
2
3.9 m/s
2
2.6 m/s
2
1.2 m/s
94.9 dB(A)
1.5 dB(A)
107.7 dB(A)
2.1 dB(A)