Scope Of Supply And Design Variants - HBM C10 Montageanleitung

Scope of supply and design variants

2 Scope of supply and design variants
S C10 force transducer
S C10 mounting instructions
S Manufacturing certificate
S 2 handles (500 kN and 1 MN versions)
Accessories (not included among the items supplied)
Connection cable/ground cable/thrust pieces
Connection cable KAB157­3, IP67 (with bayonet locking), 3 m
long, TPE outer sheath, 6 x 0.25 mm
diameter 6.5 mm
Connection cable KAB158­3, IP64 (with threaded connector), 3 m
long, TPE outer sheath, 6 x 0.25 mm
diameter 6.5 mm
Connection cable, freely configurable
(cable length, plug at amplifier end, etc.)
Loose cable socket (bayonet connection)
Loose cable socket (screw connection)
Ground cable, 400 mm
Ground cable, 600 mm
Ground cable, 800 mm
Thrust piece for nominal (rated) forces 2.5 kN­50 kN
Thrust piece for nominal (rated) forces 100 kN­250 kN
Thrust piece for nominal (rated) force 500 kN
Thrust piece for nominal (rated) force 1 MN
8
2
, free ends, shielded, outside
2
, free ends, shielded, outside
A04036_01_YI0_03 HBM: public
Ordering
number
1­KAB157­3
1­KAB158­3
K­CAB­F
3­3312.0382
3­3312.0354
1­EEK4
1­EEK6
1­EEK8
1­EDO3/50KN
1­EDO3/100KN
1­EDO3/500KN
1­EDO3/1MN
C10