Programming Cooking; Setting The Timer; Cooking Table - Bauknecht BAR2S K8 V2 IN Kurzanleitung

Please note: The time after which the icon switches off varies
because it depends on a series of factors such as ambient
temperature and function used. In any case, the product should be
considered to be off when the pointer on the selection knob is at
"0".

4. PROGRAMMING COOKING

You will need to select a function before you can start
programming cooking.
DURATION
Keep pressing until the
on the display.
Use or to set the cooking time you require, then press
to confirm.
Activate the function by turning the thermostat knob to the
temperature you require: an audible signal will sound and the
display will indicate that cooking is complete.
Please note: To cancel the cooking time you have set, keep pressing
until the icon starts flashing on the display, then use
reset the cooking time to "00:00". This cooking time includes a
preheating phase.
PROGRAMMING THE END COOKING TIME/
DELAYED START
After a cooking time has been set, starting the function can be
delayed by programming its end time: press
icon and the current time start flashing on the display.
Use or to set the time you want cooking to end and
press to confirm.

COOKING TABLE

RECIPE
Leavened cakes
Biscuits / tartlets
Pizza / Focaccia
Lasagne / baked pasta / cannelloni /
flans
Lamb / veal / beef / pork 1 kg
Baked fish/en papillote 0.5 kg
(fillets, whole)
Chicken / rabbit / duck 1 kg
Toasted bread
icon and "00:00" start flashing
until the
FUNCTION PREHEAT
Activate the function by turning the thermostat knob to the
temperature you require: the function will remain paused until
it starts automatically after the period of time that has been
calculated in order forcooking to finish at the time you have
set.
Please note: To cancel the setting, switch the oven off by turning
the selection knob to the
Please note: Delay to start functionality is not available for Grill and
Turbo Grill functions.
END OF COOKING
An audible signal will sound and the display will indicate that
the function has finished.
Turn the selection knob to select a different function or to
to switch the oven off.
Please note: If the timer is active, the display will show "END"
alternately with the remaining time.

5. SETTING THE TIMER

This option does not interrupt or program cooking but
allows you to use the display as a timer, either during while a
function is active or when the oven is off.
Keep pressing until the
on the display.
to
Use or to set the time you require and press
confirm. An audible signal will sound once the timer has
finished counting down the selected time.
Notes: To cancel the timer, keep pressing
starts flashing, then use
TEMPERATURE (°C)
Yes 170
Yes 160
Yes 160
Yes 160
Yes 160
Yes 160
Yes 190 - 250
Yes 190 - 250
Yes 190 - 200
Yes 190 - 200
Yes 170 - 190
Yes 200 - 230
5' 250
position.
icon and "00:00" start flashing
until the
to reset the time to "00:00".
DURATION LEVEL AND
(MIN) ACCESSORIES
2
30 - 50
2
30 - 50
4
40 - 60*
3
25 - 35
3
25 - 35
4
20 - 35*
2
15 - 50
4
25 - 50*
2
45 - 65
3
80 - 110
2
30 - 45
2
50 - 100
5
2 - 6
to
icon
1
2
2