Fronius TransPocket 4000 CEL Bedienungsanleitung Seite 78

TR 3000 remote control - view from the left
(5)
TR 3000 remote control - view from the right
(7)
IMPORTANT! Parameters which can be adjusted on the remote control cannot
be altered on the power source. These parameters can only be altered on the re-
mote control.
78
(5)
(4)
Welding current range selector switch
For selecting the welding current range that can be set using the welding
current adjuster (3)
- min - 150 A:
0 minimum welding current
10 welding current is 150 A
- 100 A - max:
0 welding current is 100 A
10 maximum welding current
(7)
(6)
Changeover switch for polarity reverser
For controlling the polarity reverser (option)
(+) Positive welding potential on the (+) current socket
(-) Negative welding potential on the (-) current socket
(4) Welding process selector
switch
For selecting the welding pro-
cess
- MMA welding
- MMA welding with Cel elec-
trode
- Special processes
- TIG welding with touch-
down ignition
(6) Arc-force dynamic adjuster
Manual metal arc welding ... for
influencing the short-circuiting
amperage at the instant of dro-
plet transfer
0 soft, low-spatter arc
100 harder, more stable arc