Fitting The Foam Gasket - Atag HI21471 Gebrauchsanweisung

Fitting the foam gasket

INFORMATION!
Some appliances come with the gasket already fitted!
Before installing the appliance into a kitchen worktop, attach the foam gasket supplied with the
appliance to the bottom side of the glass ceramic hob.
• Remove the protective film from the gasket.
• Attach the gasket to the bottom side of the glass (2–3 mm away from the edge). The gasket has
to be applied along the entire edge of the glass. The gasket may not overlap in the corners.
• When fitting the gasket, make sure it is not damaged by or in contact with any sharp objects.
WARNING!
Do not install the appliance without this gasket!
• The worktop has to be completely level.
• Protect the cut out surfaces.
Installation
51