Building In Dimensions; Fitting The Hob - Atag HL40..F Bedienungsanleitung Und Installationsanweisung

installation guide
building in

building in dimensions

Saw the opening in the worktop. This should be done very
accurately (see table). Also saw out any partitions that may
be present.
table
Type of hob
Cooklight
Electrical connection
230 V - 50 Hz
15-pin connection plug
Appliance width x depth
575x505 mm
Built-in height incl. clamps
from top of worktop
59 mm
Cut out dimensions
width x depth
560x490 mm
Worktop thickness
28 - 50 mm
Power of elements
Front left
Front left double
Rear left
Rear right
Front right
GB 14
HL40..F HL40..G
X X
X X
X X
X X
X X
X X
X X
2300 W
2200/1000 W
1200 W 1200 W
2000 W 2000 W
1200 W 1200 W

fitting the hob

The required cut-out dimension is at least 640 mm
minus the thickness of the worktop.
cut-out
When the desired cut-out dimension is not available,
the cut-out dimension must begin at least 20 mm
min. 20 mm
from the front of the cupboard.
installation guide
building in
GB 15