8
CONNECTION
The load cells on weighing modules can be connected to:
S
Carrier‐frequency measuring amplifiers or
S
DC meas. amplifiers suitable for strain‐gage based measurement systems.
The wiring assignment of the load cell is shown in Fig. 8.1.
Fig. 8.1
Wiring assignment of the load cell (six‐wire circuitry)
12
(gray)
Sense (-)
(black)
Feeding (-)
(white)
Sense(+)
(blue)
Feeding (+)
(green)
Sense(+)
(red)
Signal (-)
(wire strand)
Shield, filler connected with housing,
in the case of type Z6F and Z6G load
cells
Z6/M
CONNECTION