Operation - HBM Z6/M Montageanleitung

6

OPERATION

S
Dust, dirt and other foreign bodies must not be allowed to collect in such a way that
movement of the transducer (bellows) is restricted.
S
The gap for the overload stop and lateral stops must also be kept free of
contamination.
S
The play of the overload stop (for details see table "Specifications for the weighing
module") should be checked at regular intervals, for instance with a feeler gage, and
be readjusted if necessary.
S
The weighing modules should not be completely relieved of load. This prevents the
load application elements from lifting out.
S
Lateral displacements which exceed the maximum permissible value and do not act in
the direction of the stay rods should be avoided by aligning the other modules appro­
priately, or should be absorbed by other stops or retention devices.
S
The play in the stay rods should be regularly checked and if necessary readjusted.
10
Z6/M
OPERATION